Isolated Flyback Converter with 18V-28V Input and 12V Output
The project presented here is a micropower no-opto isolated flyback converter featuring the LT8304 chip from Analog Devices. This circuit outputs 12V and maintains tight regulation with a load current from 10mA up to 1A and over an input voltage from 18V to 28V. The project needs less than 0.5% of its full output power as a minimum load to maintain good output voltage regulation. The transformer leakage inductance causes a voltage spike on the primary side after the power switch turns off. To limit this leakage inductance spike within the MOSFET voltage rating of 150V, an RC snubber, and a TVS clamp are installed to dampen the ringing and clamp the MOSFET drain voltage to a safe level.
Features
- Supply Input 18V to 28V DC
- Output 12V 10mA-1A
- Low Ripple Burst Mode Operation at Light Load
- Minimum Load < 0.5% (Typ) of Full Output
- Accurate EN/UVLO Threshold and Hysteresis
- Undervoltage Lockout Accurate 1.214V Threshold
- Internal Compensation and Soft-Start
- Temperature Compensation for Output Diode
- Output Short-Circuit Protection
- PCB Dimensions 56.36 x 17.46 mm
Share
The project presented here is a micropower no-opto isolated flyback converter featuring the LT8304 chip from Analog Devices. This circuit outputs 12V and maintains tight regulation with a load current from 10mA up to 1A and over an input voltage from 18V to 28V. The project needs less than 0.5% of its full output power as a minimum load to maintain good output voltage regulation. The transformer leakage inductance causes a voltage spike on the primary side after the power switch turns off. To limit this leakage inductance spike within the MOSFET voltage rating of 150V, an RC snubber, and a TVS clamp are installed to dampen the ringing and clamp the MOSFET drain voltage to a safe level.
Features
- Supply Input 18V to 28V DC
- Output 12V 10mA-1A
- Low Ripple Burst Mode Operation at Light Load
- Minimum Load < 0.5% (Typ) of Full Output
- Accurate EN/UVLO Threshold and Hysteresis
- Undervoltage Lockout Accurate 1.214V Threshold
- Internal Compensation and Soft-Start
- Temperature Compensation for Output Diode
- Output Short-Circuit Protection
- PCB Dimensions 56.36 x 17.46 mm
Dotfry has partnered with reputed logistic partners for our logistic services, to ensure that all our products reach you in the best of conditions with no damages. We ensure you that we use packaging materials of the best quality, which is sourced from reliable vendors, and ensure thorough testing of package worthiness before using them for shipping and delivery of our products.
Related Products
